Sale!

Cisco Certified Network Associate (CCNA) Practice Exam Pack

Original price was: $30.00.Current price is: $15.00.

Put your Cisco Certified Network Associate (CCNA) study into practice. Work through topic-based quizzes, use timed sets to work on pacing, and revisit concepts with a study guide and flashcards.

-
+

Specs

Category: Brand:

Description

ExamsDigest Logo
Practice materials by ExamsDigest

For learners studying for Cisco Certified Network Associate (CCNA)

Last updated 11/2026
English
73,194 learners
YOUR LEARNING GOALS

What you'll learn

Troubleshoot IPv4 and IPv6 addressing, DHCP relay, physical interfaces and wireless client connectivity by interpreting symptoms, subnet boundaries and device output in practical network scenarios.
Interpret routing tables, static routes, OSPFv2 and OSPFv3 behavior, and gateway redundancy, then compare suitable NAT, DNS, AAA and access-control choices for network services.
Select appropriate VLAN, 802.1Q trunk, LACP EtherChannel and Rapid PVST+ configurations, including edge-port protections, to meet access requirements and resolve switching problems.
Evaluate AI-assisted troubleshooting recommendations, prompt choices and syslog messages, while distinguishing SNMP, Ansible and network-management approaches that support controlled, evidence-based operational decisions.
TAKE A LOOK INSIDE

Practice pack content

5 domains • 1,200 questions • study guide • flashcards
1. Network Infrastructure and Connectivity
Quiz
2. Switching and Network Access
Quiz
3. IP Routing
Quiz
4. Network Services and Security
Quiz
5. AI, and Network Operations and Management
Quiz
Timed-Mode Set 1: Cisco Certified Network Associate (CCNA) Exam Simulator
Quiz
Timed-Mode Set 2: Cisco Certified Network Associate (CCNA) Exam Simulator
Quiz
Timed-Mode Set 3: Cisco Certified Network Associate (CCNA) Exam Simulator
Quiz
Timed-Mode Set 4: Cisco Certified Network Associate (CCNA) Exam Simulator
Quiz
Timed-Mode Set 5: Cisco Certified Network Associate (CCNA) Exam Simulator
Quiz
Chapter 1: Network Infrastructure and Connectivity
Guide
Chapter 2: Switching and Network Access
Guide
Chapter 3: IP Routing
Guide
Chapter 4: Network Services and Security
Guide
Chapter 5: AI, and Network Operations and Management
Guide
Set 1: CCNA 200-301 v2.0 Mixed Review
Flashcards
Set 2: CCNA 200-301 v2.0 Mixed Review
Flashcards
Set 3: CCNA 200-301 v2.0 Mixed Review
Flashcards
Set 4: CCNA 200-301 v2.0 Mixed Review
Flashcards
Set 5: CCNA 200-301 v2.0 Mixed Review
Flashcards
PRACTICE QUESTION PREVIEW

Try 3 CCNA 200-301 v2.0 practice questions

Choose an answer, explore the explanation, and see why the other options are less suitable. Three short scenarios. No sign-in required.

Network Infrastructure and ConnectivityObjective 1.7 · Troubleshoot DHCPv4 client, server, and relay on IOS devices

1. DHCP requests that never reach the server

An IOS XE router’s GigabitEthernet0/0 has 10.30.0.1/24 for clients; GigabitEthernet0/1 reaches a DHCP server at 10.100.0.10. New clients receive no offers: DHCP service, scope, routing and filtering are correct, but no relay is configured. Which change forwards their initial DHCPDISCOVER broadcasts to the server?

  1. Configure ip helper-address 10.100.0.10 on GigabitEthernet0/1.
  2. Configure ip helper-address 10.100.0.10 on GigabitEthernet0/0.
  3. Configure ip helper-address 10.30.0.1 on GigabitEthernet0/0.
  4. Configure ip helper-address 10.30.0.1 on GigabitEthernet0/1.
Answer and full explanation

Correct answer: B — Relay to 10.100.0.10 from the client-facing interface.

Why B is correct

Initial DHCP discovery messages are broadcasts on the client subnet. A router does not normally forward those broadcasts to another subnet as ordinary routed traffic. The helper must therefore be configured on GigabitEthernet0/0, where the client requests arrive. Its destination is the DHCP server, 10.100.0.10, not the client’s default gateway. With the stated scope and network path already correct, this supplies the missing relay function.

Why the other options are less suitable

  • A — Server address on the server-facing interface: The destination address is correct, but the helper is placed on the wrong interface. It must process the broadcasts entering from the client subnet, not wait for them on the server side.
  • C — Gateway address on the client-facing interface: The interface is correct, but 10.30.0.1 is the router’s client-side address. The helper destination should identify the remote DHCP server that provides the leases.
  • D — Gateway address on the server-facing interface: Both the placement and destination are unsuitable for these clients. This neither processes their incoming broadcasts on GigabitEthernet0/0 nor targets the DHCP server.

Key takeaway: Place the DHCP helper on the interface receiving client broadcasts and point it at the DHCP server.

Read two more sample questions

IP RoutingObjective 3.1 · Interpret a routing table to identify the next hop for a packet

2. Checking an AI routing recommendation

A router has installed routes for 10.24.0.0/16 via 192.0.2.1, 10.24.8.0/24 via 192.0.2.2, and 10.24.8.64/26 via 192.0.2.3, plus a default via 192.0.2.4. An AI assistant recommends the /24 for 10.24.8.70 because its administrative distance is lower. With all next hops reachable and normal destination-based forwarding, which next hop should the technician select?

  1. 192.0.2.4, using the installed default route 0.0.0.0/0.
  2. 192.0.2.2, using the installed network route 10.24.8.0/24.
  3. 192.0.2.3, using the installed network route 10.24.8.64/26.
  4. 192.0.2.1, using the installed network route 10.24.0.0/16.
Answer and full explanation

Correct answer: C — 192.0.2.3 through the longest matching prefix, /26.

Why C is correct

Forwarding uses the longest matching prefix among the installed routes. The destination 10.24.8.70 falls within 10.24.8.64/26, which spans addresses .64 through .127 in that last octet. That /26 is more specific than the matching /24, /16 and default entries. Administrative distance helps choose between routing sources for the same prefix during route installation; it does not override a more specific installed route during forwarding. The technician should therefore reject the assistant’s recommendation and select 192.0.2.3.

Why the other options are less suitable

  • A — Default route: A default route provides a fallback when no more specific installed route matches. Here, several specific routes match, including the /26.
  • B — The /24 route: This route matches the destination but is less specific than the /26. A lower administrative distance does not change that forwarding decision.
  • D — The /16 route: This broader network also contains the destination. It would be relevant without the matching narrower entries, but it loses to the /26 here.

Key takeaway: Validate AI advice against the routing table: longest prefix match controls normal forwarding among installed routes.

AI, and Network Operations and ManagementObjective 5.6 · Interpret syslog message content, severity levels, and facilities

3. A message missing from the remote log

An IOS XE device records %LINK-3-UPDOWN and %SYS-5-CONFIG_I messages in its local buffer. Remote logging uses logging trap warnings, and the collector and delivery path work normally. Based only on this severity threshold, which messages should be forwarded to the remote collector?

  1. Forward the severity 3 link message, but filter the severity 5 configuration message.
  2. Forward the severity 5 configuration message, but filter the severity 3 link message.
  3. Forward both messages because the local buffer has already recorded each of them.
  4. Filter both messages because neither one has the configured severity number of 4.
Answer and full explanation

Correct answer: A — Forward severity 3; filter severity 5 at the warnings threshold.

Why A is correct

The warnings threshold corresponds to severity 4. It includes that level and all numerically lower, more severe levels, so levels 0 through 4 qualify. The severity 3 LINK message is therefore forwarded, while the severity 5 SYS message is excluded. Local buffering and remote logging can use different severity settings. Seeing both messages locally does not mean that both meet the remote destination’s threshold.

Why the other options are less suitable

  • B — Only the severity 5 message: This reverses the severity ordering. Lower numbers indicate greater severity, so level 3 qualifies and level 5 does not.
  • C — Both locally recorded messages: The local buffer is a separate logging destination. Its contents do not override the threshold controlling messages sent to the remote collector.
  • D — Only exact severity matches: The configured level is a threshold, not an exact-match filter. Severity 3 is included because it is more severe than level 4.

Key takeaway: A syslog threshold includes its own severity and lower-numbered levels; evaluate each logging destination separately.

Your sample score resets when this page reloads.

Your practice pack includes

1,200 practice questions
Study guide included
Detailed answer explanations
Unlimited practice attempts
5 mixed-review flashcard sets
Desktop and mobile access
Lifetime course access
Certificate of completion
YOUR PRACTICE TOOLKIT

More ways to make each study session count

Focus on a topic, practise under a time limit, or return to the supporting resources before your next attempt.

Domain-based practice

Quizzes grouped into CCNA 200-301 v2.0 topic sections, so you can focus on a specific area.

Timed practice sets

Dedicated timed sessions to practise allocating time and moving through questions.

Study guide

Chapters organized by exam domain to help you revisit concepts before practicing again.

Flashcards

Five mixed-review flashcard sets for short recall sessions between longer study periods.

Requirements

THE OFFICIAL EXAM BLUEPRINT

Know the exam you’re studying for

These details describe Cisco’s official Cisco Certified Network Associate (200-301 CCNA) v2.0 exam.

UP TO
Not publicly specified
questions
TIME LIMIT
120
official exam
PASSING SCORE
Not publicly specified
on a 100–900 scale
CCNA 200-301 v2.0 domains
EXAM WEIGHT
Network Infrastructure and Connectivity
25%
Physical links, virtualization, addressing, wireless connectivity and DHCP troubleshooting.
Switching and Network Access
25%
VLANs, trunks, EtherChannel, edge ports, discovery and spanning-tree operations.
IP Routing
20%
Route selection, static routing, OSPF and first-hop redundancy.
Network Services and Security
20%
AAA, secure transfers, NAT, DNS, VPNs, ACLs and Layer 2 protections.
AI, and Network Operations and Management
10%
AI assistance, prompts, management approaches, SNMP, Ansible and syslog interpretation.

What our students say

“I kept mixing up longest prefix match and administrative distance while studying for CCNA. Working through the routing scenarios and reading the explanations helped me understand where my reasoning was going wrong instead of just guessing again.”

Lucas Morgan
✓ Verified Review

“The practice questions gave me specific topics to revisit in my notes, especially DHCP relay and interpreting syslog messages. That made my study sessions more focused because I could see which concepts I still needed to work on.”

Hannah Reed
✓ Verified Review

“I used ExamsDigest alongside my own networking labs. What I appreciated most was the explanation of each incorrect option—it helped me understand why a command could be valid but still be the wrong choice for that particular situation.”

Benjamin Clarke
✓ Verified Review

Your questions, answered.

These questions target CCNA 200-301 v2.0, not v1.1. Cisco has announced v2.0 testing from 3 February 2027, with v1.1 available through 2 February 2027. Check the version that applies to your intended exam date, then compare the product’s listed topics and resources with that blueprint. The unchanged 200-301 code alone is not enough to distinguish the versions.

This practice is for learners developing associate-level network administration and troubleshooting skills, including IT students, support technicians and junior network staff. Comfort with subnetting, Ethernet, router and switch commands, and basic network services will help. Cisco lists no formal CCNA prerequisites, but recommends practical experience. Learners who are new to these tasks should use questions alongside structured study and their own configuration practice.

Combine question practice with your own authorized network exercises. Useful tasks include repairing DHCP relay, checking VLAN and trunk settings, troubleshooting routes, and interpreting logs. Compare AI-generated suggestions with actual device output before accepting a diagnosis. These activities complement written scenarios; they do not imply that equipment, software licenses or interactive labs are included in this pack.

Use each incorrect answer to pinpoint a particular misunderstanding rather than memorize the correct letter. Compare the explanation with your reasoning and record which scenario detail changed the decision. Revisit that topic, then try a different example or practical exercise. Keep track of whether you missed a technical distinction, overlooked a requirement or accepted an assumption without checking it. A practice score does not guarantee an official exam result.

No. The v2.0 blueprint says candidates may need to evaluate recommendations from agentic AI or digital network assistants. This preview offers only three single-answer multiple-choice questions; it is not the official testing interface or a practical lab. Consult Cisco’s current candidate guidance for official tasks, and check the product description separately for the practice formats included.

No. Buying or completing practice questions does not award the CCNA certification. Cisco identifies passing the official 200-301 exam as the certification’s examination requirement; candidates must also follow the applicable registration rules and agreements. Check which exam version applies to your test date. Review the product’s stated terms for any voucher arrangements rather than assuming that a practice purchase includes an official exam booking.

30-day conditional refund policy

Eligible requests must be made within 30 calendar days, with no more than 20% of any included simulator completed. The purchase must not already be refunded or under a payment dispute or chargeback. Other provisions apply; mandatory consumer rights remain unaffected.

Cisco Certified Network Associate (CCNA) Practice Exam Pack
$15.00
One-time purchase. No recurring access fee.
Secure checkout
Guaranteed safe checkout via Stripe
60-Day Pass Guarantee
Pass your exam or we pay for your retake.
30-day refund guarantee
Not satisfied? Request your money back within 30 days.
Cisco Training Partner
Official partner you can trust.

Additional information

Databricks Level

Databricks Skills