Description

For learners studying for Cisco Certified Network Associate (CCNA)
What you'll learn
Practice pack content
Domain 1 - Network Infrastructure and Connectivity
Domain 2 – Switching and Network Access
Domain 3 – IP Routing
Domain 4 – Network Services and Security
Domain 5 – AI, and Network Operations and Management
Final Exam Simulators
Exam Study Guide
Interactive Flashcards
Try 3 CCNA 200-301 v2.0 practice questions
Choose an answer, explore the explanation, and see why the other options are less suitable. Three short scenarios. No sign-in required.
Network Infrastructure and ConnectivityObjective 1.7 · Troubleshoot DHCPv4 client, server, and relay on IOS devices
1. DHCP requests that never reach the server
An IOS XE router’s GigabitEthernet0/0 has 10.30.0.1/24 for clients; GigabitEthernet0/1 reaches a DHCP server at 10.100.0.10. New clients receive no offers: DHCP service, scope, routing and filtering are correct, but no relay is configured. Which change forwards their initial DHCPDISCOVER broadcasts to the server?
- Configure ip helper-address 10.100.0.10 on GigabitEthernet0/1.
- Configure ip helper-address 10.100.0.10 on GigabitEthernet0/0.
- Configure ip helper-address 10.30.0.1 on GigabitEthernet0/0.
- Configure ip helper-address 10.30.0.1 on GigabitEthernet0/1.
Answer and full explanation
Correct answer: B — Relay to 10.100.0.10 from the client-facing interface.
Why B is correct
Initial DHCP discovery messages are broadcasts on the client subnet. A router does not normally forward those broadcasts to another subnet as ordinary routed traffic. The helper must therefore be configured on GigabitEthernet0/0, where the client requests arrive. Its destination is the DHCP server, 10.100.0.10, not the client’s default gateway. With the stated scope and network path already correct, this supplies the missing relay function.
Why the other options are less suitable
- A — Server address on the server-facing interface: The destination address is correct, but the helper is placed on the wrong interface. It must process the broadcasts entering from the client subnet, not wait for them on the server side.
- C — Gateway address on the client-facing interface: The interface is correct, but 10.30.0.1 is the router’s client-side address. The helper destination should identify the remote DHCP server that provides the leases.
- D — Gateway address on the server-facing interface: Both the placement and destination are unsuitable for these clients. This neither processes their incoming broadcasts on GigabitEthernet0/0 nor targets the DHCP server.
Key takeaway: Place the DHCP helper on the interface receiving client broadcasts and point it at the DHCP server.
Read two more sample questions
IP RoutingObjective 3.1 · Interpret a routing table to identify the next hop for a packet
2. Checking an AI routing recommendation
A router has installed routes for 10.24.0.0/16 via 192.0.2.1, 10.24.8.0/24 via 192.0.2.2, and 10.24.8.64/26 via 192.0.2.3, plus a default via 192.0.2.4. An AI assistant recommends the /24 for 10.24.8.70 because its administrative distance is lower. With all next hops reachable and normal destination-based forwarding, which next hop should the technician select?
- 192.0.2.4, using the installed default route 0.0.0.0/0.
- 192.0.2.2, using the installed network route 10.24.8.0/24.
- 192.0.2.3, using the installed network route 10.24.8.64/26.
- 192.0.2.1, using the installed network route 10.24.0.0/16.
Answer and full explanation
Correct answer: C — 192.0.2.3 through the longest matching prefix, /26.
Why C is correct
Forwarding uses the longest matching prefix among the installed routes. The destination 10.24.8.70 falls within 10.24.8.64/26, which spans addresses .64 through .127 in that last octet. That /26 is more specific than the matching /24, /16 and default entries. Administrative distance helps choose between routing sources for the same prefix during route installation; it does not override a more specific installed route during forwarding. The technician should therefore reject the assistant’s recommendation and select 192.0.2.3.
Why the other options are less suitable
- A — Default route: A default route provides a fallback when no more specific installed route matches. Here, several specific routes match, including the /26.
- B — The /24 route: This route matches the destination but is less specific than the /26. A lower administrative distance does not change that forwarding decision.
- D — The /16 route: This broader network also contains the destination. It would be relevant without the matching narrower entries, but it loses to the /26 here.
Key takeaway: Validate AI advice against the routing table: longest prefix match controls normal forwarding among installed routes.
AI, and Network Operations and ManagementObjective 5.6 · Interpret syslog message content, severity levels, and facilities
3. A message missing from the remote log
An IOS XE device records %LINK-3-UPDOWN and %SYS-5-CONFIG_I messages in its local buffer. Remote logging uses logging trap warnings, and the collector and delivery path work normally. Based only on this severity threshold, which messages should be forwarded to the remote collector?
- Forward the severity 3 link message, but filter the severity 5 configuration message.
- Forward the severity 5 configuration message, but filter the severity 3 link message.
- Forward both messages because the local buffer has already recorded each of them.
- Filter both messages because neither one has the configured severity number of 4.
Answer and full explanation
Correct answer: A — Forward severity 3; filter severity 5 at the warnings threshold.
Why A is correct
The warnings threshold corresponds to severity 4. It includes that level and all numerically lower, more severe levels, so levels 0 through 4 qualify. The severity 3 LINK message is therefore forwarded, while the severity 5 SYS message is excluded. Local buffering and remote logging can use different severity settings. Seeing both messages locally does not mean that both meet the remote destination’s threshold.
Why the other options are less suitable
- B — Only the severity 5 message: This reverses the severity ordering. Lower numbers indicate greater severity, so level 3 qualifies and level 5 does not.
- C — Both locally recorded messages: The local buffer is a separate logging destination. Its contents do not override the threshold controlling messages sent to the remote collector.
- D — Only exact severity matches: The configured level is a threshold, not an exact-match filter. Severity 3 is included because it is more severe than level 4.
Key takeaway: A syslog threshold includes its own severity and lower-numbered levels; evaluate each logging destination separately.
Preview complete
You have tried all three samples
Review the explanations or try the samples again. This short preview covers only a small part of the exam objectives.
Your sample score resets when this page reloads.
Your practice pack includes
More ways to make each study session count
Focus on a topic, practise under a time limit, or return to the supporting resources before your next attempt.
Domain-based practice
Timed practice sets
Study guide
Flashcards
Requirements
- Familiarity with IP subnetting, basic Ethernet and Cisco device output helps with these scenarios. Cisco lists no formal CCNA prerequisites and recommends practical router and switch experience.
- Combine questions with foundational study and your own authorized configuration exercises. Practise diagnosing DHCP, VLAN, routing and access-control problems rather than treating answer recognition as hands-on competence.
- You will need an internet-connected device, a current web browser and an ExamsDigest account to access this online practice product and review your study work.
Know the exam you’re studying for
These details describe Cisco’s official Cisco Certified Network Associate (200-301 CCNA) v2.0 exam.
What our students say
“I kept mixing up longest prefix match and administrative distance while studying for CCNA. Working through the routing scenarios and reading the explanations helped me understand where my reasoning was going wrong instead of just guessing again.”
Lucas Morgan
✓ Verified Review
“The practice questions gave me specific topics to revisit in my notes, especially DHCP relay and interpreting syslog messages. That made my study sessions more focused because I could see which concepts I still needed to work on.”
Hannah Reed
✓ Verified Review
“I used ExamsDigest alongside my own networking labs. What I appreciated most was the explanation of each incorrect option—it helped me understand why a command could be valid but still be the wrong choice for that particular situation.”
Benjamin Clarke
✓ Verified Review
Your questions, answered.
Which CCNA exam version do these questions target?
These questions target CCNA 200-301 v2.0, not v1.1. Cisco has announced v2.0 testing from 3 February 2027, with v1.1 available through 2 February 2027. Check the version that applies to your intended exam date, then compare the product’s listed topics and resources with that blueprint. The unchanged 200-301 code alone is not enough to distinguish the versions.
Who is this CCNA practice for?
This practice is for learners developing associate-level network administration and troubleshooting skills, including IT students, support technicians and junior network staff. Comfort with subnetting, Ethernet, router and switch commands, and basic network services will help. Cisco lists no formal CCNA prerequisites, but recommends practical experience. Learners who are new to these tasks should use questions alongside structured study and their own configuration practice.
How should I combine questions with practical study?
Combine question practice with your own authorized network exercises. Useful tasks include repairing DHCP relay, checking VLAN and trunk settings, troubleshooting routes, and interpreting logs. Compare AI-generated suggestions with actual device output before accepting a diagnosis. These activities complement written scenarios; they do not imply that equipment, software licenses or interactive labs are included in this pack.
What should I do after choosing an incorrect answer?
Use each incorrect answer to pinpoint a particular misunderstanding rather than memorize the correct letter. Compare the explanation with your reasoning and record which scenario detail changed the decision. Revisit that topic, then try a different example or practical exercise. Keep track of whether you missed a technical distinction, overlooked a requirement or accepted an assumption without checking it. A practice score does not guarantee an official exam result.
Does this preview reproduce every official exam task?
No. The v2.0 blueprint says candidates may need to evaluate recommendations from agentic AI or digital network assistants. This preview offers only three single-answer multiple-choice questions; it is not the official testing interface or a practical lab. Consult Cisco’s current candidate guidance for official tasks, and check the product description separately for the practice formats included.
Does completing the practice award the CCNA certification?
No. Buying or completing practice questions does not award the CCNA certification. Cisco identifies passing the official 200-301 exam as the certification’s examination requirement; candidates must also follow the applicable registration rules and agreements. Check which exam version applies to your test date. Review the product’s stated terms for any voucher arrangements rather than assuming that a practice purchase includes an official exam booking.
30-day conditional refund policy
Eligible requests must be made within 30 calendar days, with no more than 20% of any included simulator completed. The purchase must not already be refunded or under a payment dispute or chargeback. Other provisions apply; mandatory consumer rights remain unaffected.
Useful links for your preparation



